 clutch problem????, help! |
 Jan 4, 2010 - 12:58 AM
|
 
|
|
Enthusiast  Joined Jul 15, '07 From High ridge MO Currently Offline Reputation: 0 (0%)  |
My car will start but will not go in gear. I replaced the clutch and master cylinder last year around this time. As of now the clutch pedal has no pressure. Has fluid but the peice that would move in and out when I push on the pedal does not move anymore. I think its my slave or master cylinder.
|
 |
Replies
|
Jan 4, 2010 - 5:15 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
gotta focus on getting the pressure back. If the slave doesnt work then there is no way to tell if anything internal is broken without dropping the trans. with 10k i high doubt its broken.
well if you have time and patience i myself would get the slave (since it doesnt work), then if you still dont have pressure or very little pressure then change the master. you also gotta take proper bleeding of the lines into account. took me about 4 trys to get the lines properly bled. -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
Posts in this topic
my96celica clutch problem???? Jan 4, 2010 - 12:58 AM
808celica Do both at the same time, then gravity bleed it.
... Jan 4, 2010 - 2:16 AM my96celica So you dont think it is my clutch or anything else... Jan 4, 2010 - 2:55 AM 808celica how many miles on the clutch job?? I doubt its tha... Jan 4, 2010 - 2:58 AM my96celica THe clutch has around 10,000 miles on it. The slav... Jan 4, 2010 - 4:48 PM 808celica Just go on ahead and get a Slave cylinder if its n... Jan 4, 2010 - 4:55 PM my96celica So buy the slave and master cylinder? Do you think... Jan 4, 2010 - 5:05 PM my96celica How do I bleed the clutch line if there is no pres... Jan 4, 2010 - 5:26 PM 808celica just like bleeding brakes. are you gonna use the 2... Jan 4, 2010 - 7:03 PM GriffGirl It's totally either your master or slave cylin... Jan 4, 2010 - 7:30 PM my96celica Thanks guys! How long would you think it takes... Jan 5, 2010 - 12:09 AM 808celica how good are you with cars?? you'll need a ran... Jan 5, 2010 - 2:51 AM my96celica Thanks ppl my car is up and running again. Jan 8, 2010 - 4:46 PM GriffGirl So which was it? Or did you just replace them both... Jan 8, 2010 - 5:02 PM my96celica It was the slave cylinder. Jan 8, 2010 - 8:39 PM
808celica RE: clutch problem???? Jan 9, 2010 - 1:39 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 17th, 2025 - 6:20 PM |