 '94 ST, possible to pull axles w/o unbolting from the spindle? |
 Jan 3, 2010 - 7:57 PM
|
 
|
 Enthusiast  Joined Oct 16, '02 From Hohenwald, Tennessee Currently Offline Reputation: 1 (100%)  |
Haven't posted here in ages. But that's cause the Celica hasn't really had any major problems. That's a good thing
 Just wanted to know if anyone has ever tried to pull the driver side axle from the C52 tranny without unbolting it from the spindle? I have a busted tranny seal, and I know the pain of pulling an axle. Just hoping I can bypass all the hard stuff and get the axle out quickly to change the seal. If not, I guess it's time to get dirty 
|
 |
Replies
|
Jan 4, 2010 - 8:46 PM
|
|
|
Enthusiast Joined Oct 16, '02 From Hohenwald, Tennessee Currently Offline Reputation: 1 (100%) |
Thanks for all the help. Now I'm not even sure if I'm gonna replace it or not. I jacked my car up tonight after work and took the fill plug out of the tranny, and fluid poured out. It wasn't a cold check, but it was being pretty generous with the fluid. I also wiped off what had leaked to the bottom of the differential case, and it was caked on there pretty hard. I'm guessing this leak has been going on for awhile, but it's way too slow for me to worry about it right now. Still good to know I can do this without taking the axle loose from the spindle.
|
Posts in this topic
Delta_Phoenix '94 ST, possible to pull axles w/o unbolting from the spindle? Jan 3, 2010 - 7:57 PM
Euphoria it would probably be harder doing it without undoi... Jan 4, 2010 - 12:22 AM GriffGirl I've been able to pull my axle w/out unbolting... Jan 4, 2010 - 12:30 PM playr158 unbolt the bottom ball joint from the control arm ... Jan 4, 2010 - 1:14 PM
Hanyo i just replaced this seal 3 days ago. took about 2... Jan 4, 2010 - 6:46 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 21st, 2025 - 12:22 PM |