![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jul 13, '09 Currently Offline Reputation: 9 (91%) ![]() |
so i am in the middle of making a duel spoiler for my vert as my GT4 spoiler has a gap on the inside of the blocks...
![]() so here is how its going..... first i had to remove the gt4 spoiler.... ![]() ![]() then i marked the old two post spoiler... ![]() then cut off the ends... ![]() and put the gt4 spoiler over the top... ![]() ![]() ![]() and then put it back on the car... ![]() ![]() then it got too cold so i retired for the day, gonna smooth it out and finish it off next week but for now this is it, primered and ready to finish..... This post has been edited by ajmorris1977: Jan 8, 2010 - 2:16 AM -------------------- You're here for a good time, not a long time. - Colin McRae When in doubt... Flat out! - Colin McRae Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you.... |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 29, '09 From Lake Ariel, PA Currently Offline Reputation: 4 (100%) ![]() |
It's a great idea, you need to take it a little farther though to make it look nice. I would personally mold the gt4 wing so its flush with the truck and also mold the two wings together to make one piece.
-------------------- ![]() Representing the Convertible Crew since 2008 |
![]() ![]() |
Lo-Fi Version | Time is now: July 19th, 2025 - 4:14 AM |