alarm instal help Options

[Cormudgen]

Ok,

I began installing my alarm today and have a couple of questions. I have Coomer's wirin diagram

http://www.6gc.net/misc/images/other/rs650...all_diagram.jpg

but am not sure exactly where those wires are. I have removed the drivers side kick panel and have found about 4 different harness down there. For example at least 2 or 3 of the harness have a black and white wire.

A specific example of what I'm taling about is Coomer says in his diagram for the starte output wire coming off the alarm should go into the "black/white wire @ ignition harness" how do i know which one of those harness is down there is the ignition one?

Also in another post someone said
"Door locks are negative trigger.
In the left kickpanel blue/black is lock and blue is unlock. "

What harness would this be in?


Thanks
Cormudgen

This post has been edited by Cormudgen: Dec 14, 2003 - 4:53 PM

[Coomer]

John,
My locks only have two wires coming out of them, so I'm really not sure about the extra three wires, and what they do, but as far as wiring up those two lock/unlock wires to your alarm, this is the diagram I used:



Also, about the door lock switches, I'm not sure, but if you find out, please let me know, as I'm going to be adding some door lock switches to my car soon.

Sorry I'm not much help with the door locks, but if you've got other questions, post them and we'll try to help.