6G Celicas Forums

Welcome Guest ( Log In | Register )

> 5SFE, Distributor or coil packs???
post Jan 17, 2010 - 5:21 PM
+Quote Post
jeffrosie

Enthusiast
**
Joined Sep 11, '08
From Surrey Unitedkingdom
Currently Offline

Reputation: 1 (100%)




The 99 3SFE in UK has 2 coil packs each feeding 2 cylinders, so 1 gets a spark on compression and 3 gets it on exhaust. Same with 2 and 4.
Is the 5SFE the same as this or does it come with a distributor?
Reason I'm asking is because I want to drop a 3SGE in my car in place of the 3SFE, but use all the FE electrics and have it all sdjusted usinga fuel & ignition controller as these are the 2 values that will have to be changed.
Apexi SAFC II will be used.

Will it work?
 
Start new topic
Replies
post Jan 17, 2010 - 7:04 PM
+Quote Post
jeffrosie

Enthusiast
**
Joined Sep 11, '08
From Surrey Unitedkingdom
Currently Offline

Reputation: 1 (100%)




I think it will work.
In UK the 3SFE does not have a distributor. It uses a crank pickup and coil packs instead. The distributor hole is blanked.
So fitting a GE cylinder head in place of the FE cylinder head will only create the need for the engine to take in more air which will need more fuel - just the same as forcefeeding the FE engine. Correcting the ignition timing will just make it more efficient.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 21st, 2025 - 6:54 AM