Another 7th gen airbag splice question Options

[GriffGirl]

I'm swapping my 4 spoke wheel for a 3 spoke wheel, and the airbag connectors of course don't match up. The wires from the connector that runs to the airbag module are blue and yellow. If I used the multimeter right, I've determined blue is power and yellow is ground.

The wires on the wheel connector are red and black though. I would assume that red is power and black is ground, but when I connected them the airbag light stayed on, so I switched it and ducked, no airbag deploy but the light is still on.

Can anyone confirm if the 7th gen airbag connector is indeed red for power and black for ground? And if so, do I need to reset the airbag ECU after splicing in the connection? Thanks

[Smaay]

awe sorry Michelle, i need a PM. when i installed mine, i just unhooked the battery. cut and soldiered the wires, and all done. if you ahe cruise control, i used the 6th gen control. you just have to put it in at an angle. I should do a write up on this. there seems to be alot more happening

[GriffGirl]

awe sorry Michelle, i need a PM. when i installed mine, i just unhooked the battery. cut and soldiered the wires, and all done. if you ahe cruise control, i used the 6th gen control. you just have to put it in at an angle. I should do a write up on this. there seems to be alot more happening

I'm going to do the same, just splice the wires together. The thing above, I'm assuming that's an adaptor? looks great, but I'm fine just splicing them together.

On the CC though, I've got my original one kind of crammed in there, but there's no way to actually bolt the unit in, which bothers me, so I'll also be splicing in the 7th gen CC stalk.

Enter Batman w/instructions on how-to!

abraxxa: I'll post up a jpeg of the PDF I took that info from; it's from the BGB, you can find it here on celicatech.com