alarm instal help Options

[Cormudgen]

Ok,

I began installing my alarm today and have a couple of questions. I have Coomer's wirin diagram

http://www.6gc.net/misc/images/other/rs650...all_diagram.jpg

but am not sure exactly where those wires are. I have removed the drivers side kick panel and have found about 4 different harness down there. For example at least 2 or 3 of the harness have a black and white wire.

A specific example of what I'm taling about is Coomer says in his diagram for the starte output wire coming off the alarm should go into the "black/white wire @ ignition harness" how do i know which one of those harness is down there is the ignition one?

Also in another post someone said
"Door locks are negative trigger.
In the left kickpanel blue/black is lock and blue is unlock. "

What harness would this be in?


Thanks
Cormudgen

This post has been edited by Cormudgen: Dec 14, 2003 - 4:53 PM

[SpedToe169]

Ok, now we're getting some where. I've got the starter kill thing figured out. Does anybody know whats with igntion 1 and ignition 2? I've seen that in other stuff online, but I just have the one large ignition wire and then the 250mA output. The more I think about it, I bet the 250mA outputs for starter, ignition, and accessory, are just outputs to turn different stuff on when ever one of the above conditions is present. Probably not really necessary.

Well, I guess I'll just hook up what I know and see what works. Thanks guys.