![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Nov 27, '09 From Canada Currently Offline Reputation: 4 (100%) ![]() |
ok so as stated in the title.. will it fit the rim? would it have trouble holding air if it did fit?. will i have enough room in my wheel well and strut housing clearance? last but not least. will it look like A$$~? This post has been edited by Goonter: Mar 30, 2010 - 4:01 AM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) ![]() |
make the overall offset as close to +10ish........well for my taste atleast
![]() 16x7 with a 38mm offset and a 72.62mm hub bore even if you got 54.1mm spacers you'd still need hubcentric rings that you'll place in the rim. other wise all the stress will be on your studs (big no no). That will cause some damage over time. I recently sold a set of hubcentric rings my f/s thread to Samir. He got deals ![]() -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 12:40 PM |