Jan 31, 2010 - 5:26 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
I dont know if there is one or if someone has one on how to remove the rear bumper on a 94 ST hatch
thanks in advance people- This post has been edited by mgnt232: Feb 3, 2010 - 8:08 PM -------------------- |
![]() |
Feb 1, 2010 - 1:37 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
...the very back part. There is no inner trim on the rear, all bolts are from the inside or under
1) remove tails (3 bolts per side) 2) remove license plate trim 3) remove bumper ( sides, top and bottom) next time try to contain all bumper questions to 1 post please. This post has been edited by playr158: Feb 1, 2010 - 1:38 PM |
mgnt232 delete post! Jan 31, 2010 - 5:26 PM
ajmorris1977 QUOTE (mgnt232 @ Jan 31, 2010 - 6:26... Jan 31, 2010 - 5:36 PM
yarik83 On coupes they also glued bumper to the car so you... Jan 31, 2010 - 5:56 PM
malpaso If I remember right there are:
- plastic clips ju... Feb 1, 2010 - 3:55 AM
mgnt232 Thanks guys ill post up if I have any problems.
th... Feb 1, 2010 - 1:00 PM
mgnt232 Ok thanks
On the under side of my rear bumper ther... Feb 1, 2010 - 4:17 PM
jimmykay Question
QUOTE (mgnt232 @ Feb 1, 2010 - ... Feb 1, 2010 - 5:15 PM
mgnt232 I just dont understand how to redrill them? I gues... Feb 2, 2010 - 1:53 AM
SwissFerdi Question: slightly off-topic, but do mechanics hav... Feb 1, 2010 - 5:18 PM
playr158 QUOTE (SwissFerdi @ Feb 1, 2010 - 5... Feb 1, 2010 - 6:49 PM
SwissFerdi I didn't expect them to have to get into the c... Feb 1, 2010 - 9:57 PM
playr158 yes you would drill into the old bolt. and you can... Feb 2, 2010 - 10:59 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:26 PM |