![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
I dont know if there is one or if someone has one on how to remove the rear bumper on a 94 ST hatch
thanks in advance people- This post has been edited by mgnt232: Feb 3, 2010 - 8:08 PM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
...the very back part. There is no inner trim on the rear, all bolts are from the inside or under
1) remove tails (3 bolts per side) 2) remove license plate trim 3) remove bumper ( sides, top and bottom) next time try to contain all bumper questions to 1 post please. ![]() This post has been edited by playr158: Feb 1, 2010 - 1:38 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
Ok thanks
On the under side of my rear bumper there are like 5 bolts(running in line across the bumper), or well used to be bolts there, all the bolt heads were broken off by the previous owner. Is there anyway to get those broken bolts out? ...the very back part. There is no inner trim on the rear, all bolts are from the inside or under 1) remove tails (3 bolts per side) 2) remove license plate trim 3) remove bumper ( sides, top and bottom) next time try to contain all bumper questions to 1 post please. ![]() -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 4:36 PM |