JDM Low Beam Questions, Received my set today - HID Setup and whatnot Options

[Espo]

I received my set of JDM headlights earlier than expected today (Ordered Dec 20th with an expected back order of 6-8 weeks) so I'm quite excited In any case though the headlights (high and low) don't look like they're a direct bolt on to a usdm front end...or am I just seeing things? Picture for reference:



Also, the high beams I know are 9005 just like the usdm ones, but my H1 HID bulbs (the real reason I got the projectors) don't seem to be a direct fit? I have a couple wires here that I don't know where they go:



And the bulbs obviously don't fit into these holder things either, which are pretty much needed to make the bulb stay steady and in place:



Does anyone have any experience with HID setups like this that can help me out? I'd like to go my quarter panel repaired asap and obviously, having a usdm front end I'm not wired for an H1 setup. Thanks so much in advance!

This post has been edited by Espo: Jan 29, 2010 - 11:51 PM

[trdproven]

just take a 9006 heavy duty harness and this will be the end that connects to the stock 9006, the other end you cut off and splice into an H1 or H4 harness that connects to the bulb. This is plug n play and oem looking. Wrap it with wire loom and your done. No mods, no rigging, no regrets. if you wanna go back you just unplug it, its an elementary 9006 to H1 adapter. I've mentioned this many many times, pretty simple process. I need to do a writeup and have the mods replace the whole HID wiring or H1 wiring for jdm projectors on the stickies. I'll try to do it today after work.

This post has been edited by trdproven: Feb 2, 2010 - 10:45 PM