6G Celicas Forums

Welcome Guest ( Log In | Register )

> invader skirts
post Feb 3, 2010 - 8:40 PM
+Quote Post
Spectorious



Enthusiast
**
Joined Feb 24, '09
From Scranton, PA
Currently Offline

Reputation: 13 (100%)




how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks
 
Start new topic
Replies
post Feb 3, 2010 - 9:13 PM
+Quote Post
ajmorris1977



Enthusiast
***
Joined Jul 13, '09
Currently Offline

Reputation: 9 (91%)




QUOTE (Spectorious @ Feb 3, 2010 - 8:40 PM) *
how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks


its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...


--------------------
You're here for a good time, not a long time. - Colin McRae
When in doubt... Flat out! - Colin McRae
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you....
post Feb 3, 2010 - 9:48 PM
+Quote Post
mgnt232



Enthusiast
*****
Joined Mar 16, '09
From New York
Currently Offline

Reputation: 23 (100%)




Do you know where to get the double sided tape? is it just any double sided, or is there some special stuff for SS. thanks!
Oh and i have invader SS too Spectorious, waiting for the cold to go away, if i put them on before you i will tell you how it went, and if you put them on before me, would you mind telling me any problems you had? thanks!
QUOTE (ajmorris1977 @ Feb 3, 2010 - 9:13 PM) *
QUOTE (Spectorious @ Feb 3, 2010 - 8:40 PM) *
how i install them? it looks like i would have to take out the black plastic part of teh door sill..is there something im missing or is there already a guide how to do it? thanks


its quite easy to do, take out the black plastic in the door and place them on the car, 2 screws in the front wheel well and two in the rear and the a couple in the door jam to push them down to clear the door when it closes, then reinstall the black plastic over the top of the skirt, no problem. Good luck and have fun...



--------------------
I've spilt my heart into this car :) And I don't ever plan to stop

- 6GC for Life -
>Semper Fi<

1994 Cupra :p 3sgte
1995 Celica ST DD
1969 Chevelle SS

alllll balls. P2 approved!

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 20th, 2025 - 12:29 AM