 grinding near break assy, intresting issue~ |
 Feb 3, 2010 - 9:48 PM
|
 
|
 Enthusiast  Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%)  |
Okay; so check this out;
it didn't happen first thing after the swap; but slowly emerged (within a week). quietly at first; but now it's getting really fcuking loud. I've already droped the tire and reallined the break/dust shield several times, (not the issue); then (remembering the D/S rotor conversion) i've swaped the pads arround (thinking they could be backwards), cleaned em (they had alot of debreis, but that may be unrelated) I've re-positioned the clips; i've remounted the tire a few times... (*NOTE: i have replaced the missing lugnuts the swap-shop fcuking lost...) yet this problem persists... last though is that maybe there is insufficient grease in the hub boot where it hits the bearing? here guys, listen for yourselfs!! (only watch the first few seconds of this first one, afterwords, we're making our plan and my photographer was oblivious to the "end-video" key. enjoy our conversation... lol) http://www.youtube.com/watch?v=arIU_KJy6H4 http://www.youtube.com/watch?v=I1vdpGx6ZkQ IDEAS?!?! -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)  Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
 |
Replies
|
Feb 4, 2010 - 7:38 AM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
check the wheel bearing, it sounds like it could be a bad one. see to me, it sounds less like brake grinding and more like the creaking sound of metal on metal with alot of weight. i've heard that exact sound from bad wheel bearings before, but when they're that bad they make some bad sounds at regular driving speeds as well or are almost totally locked up. get the car up, shake the wheel around, check for play.
does it ONLY make the sound when braking or just whenever the car is in motion? This post has been edited by Bitter: Feb 4, 2010 - 7:39 AM -------------------- |
|
Feb 4, 2010 - 7:41 AM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
QUOTE (Bitter @ Feb 4, 2010 - 6:38 AM) check the wheel bearing, it sounds like it could be a bad one. see to me, it sounds less like brake grinding and more like the creaking sound of metal on metal with alot of weight. i've heard that exact sound from bad wheel bearings before, but when they're that bad they make some bad sounds at regular driving speeds as well or are almost totally locked up. get the car up, shake the wheel around, check for play. does it ONLY make the sound when braking or just whenever the car is in motion? whenever the car is in motion. obviously you can hear it better when coasting. rolls just fine though. no play in hub. i've already checked that. This post has been edited by D-Man: Feb 4, 2010 - 7:41 AM -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
Posts in this topic
D-Man grinding near break assy Feb 3, 2010 - 9:48 PM
SwissFerdi "This video is private."
I'd like t... Feb 3, 2010 - 10:37 PM
D-Man QUOTE (SwissFerdi @ Feb 3, 2010 - 9... Feb 3, 2010 - 11:35 PM njccmd2002 poorly lubricated muffler bearings Feb 4, 2010 - 1:39 AM Bitter any other sounds at higher speeds? roaring, rumbl... Feb 4, 2010 - 7:54 PM D-Man again man, it's in revolution to the turning o... Feb 4, 2010 - 11:46 PM Bitter sadly the only way to look at the wheel bearing is... Feb 5, 2010 - 9:10 PM Hanyo does the car make that sound with the wheel in the... Feb 5, 2010 - 9:38 PM D-Man well it's definitely giving off the tattle tal... Feb 5, 2010 - 10:01 PM easternpiro1 you were talking to your girl (beyotch?) so nicely... Feb 6, 2010 - 2:42 AM D-Man QUOTE (easternpiro1 @ Feb 6, 2010 - 1... Feb 6, 2010 - 10:11 AM Bitter they should come pre-lubed and are pressed into th... Feb 6, 2010 - 11:21 AM D-Man well; turns out that my bearing were totaly molest... Feb 6, 2010 - 8:56 PM Bitter good work, but...and i'm sorry but theres a bu... Feb 7, 2010 - 2:58 PM D-Man QUOTE (Bitter @ Feb 7, 2010 - 1:58 P... Feb 7, 2010 - 3:43 PM Bitter taking them apart like that is easy, problem is yo... Feb 7, 2010 - 8:41 PM easternpiro1 might i add good buddy, that you SHOULD NOT UNDER ... Feb 7, 2010 - 11:53 PM Hanyo QUOTE (easternpiro1 @ Feb 7, 2010 - 8... Feb 8, 2010 - 5:45 AM Bitter pepboys has SKF or Timken, both very good quality. Feb 8, 2010 - 8:37 PM D-Man QUOTE (Bitter @ Feb 7, 2010 - 8:41 P... Feb 8, 2010 - 9:00 PM Bitter QUOTE (D-Man @ Feb 8, 2010 - 9... Feb 9, 2010 - 5:47 AM easternpiro1 QUOTE (Hanyo @ Feb 8, 2010 - 6:45 AM... Feb 9, 2010 - 1:01 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 12:29 AM |