8 pin rear foglight, need diagram Options

[yagamius]

I just got my rear fog light I will use it to control my front fogs.

I know this is some where, i checked like 10 pages and try to search it but not luck , so if someone can help me with the 8 pin diagram and which color wire is for what will be great.

thanks everyone

[RocketScott]

So I've been messing around with the switch since I got it with limited results. Of course the first thing I did was swap the light for a blue led.

Right now I have it hooked up with +12V going to the green/red and the green wire. The white/green, white/black, green/black, and red/yellow are all grounded. When I push the button the red wire goes from +.6V to +12V.

Can't seem to get the red/black wire to do anything.

I suppose that you could run the red wire to a relay to get it to switch on the fogs as well as switch on the light on the dash.

I did notice that the switch would not work without +12V going to the illumination wire (green). It must use that for more than just the illumination.

[yagamius]

So I've been messing around with the switch since I got it with limited results. Of course the first thing I did was swap the light for a blue led.

Right now I have it hooked up with +12V going to the green/red and the green wire. The white/green, white/black, green/black, and red/yellow are all grounded. When I push the button the red wire goes from +.6V to +12V.

Can't seem to get the red/black wire to do anything.

I suppose that you could run the red wire to a relay to get it to switch on the fogs as well as switch on the light on the dash.

I did notice that the switch would not work without +12V going to the illumination wire (green). It must use that for more than just the illumination.

nice great improvement, I try to find out why so many wires but not luck yet