Molded Rear Invader-, 3rd brakelight design-red gauges-decals- Options

[mgnt232]

So I decided to try and mold my RB because the sides had a 1/2" gap and a 1" gap! Keep in mind, my bodywork experience... well I dont have any lol. (and the whole car is getting repainted, this is just temp so its not too ugly)
Thanks to AJ for the info and help all the way again
here goes nothin-

...Beginning Sanding...

Bondo was nervous lol---

Got is pretty well, and primed and painted

Went back and sanded down and tried to smooth some edges down. (its just shiny because my car is very dirty, and it has clear coats on it. Thats what the whole kit looked like when i first did it. Just all needs a good 'ol dust cover lol)

Another

Started the worse side, getting a hand of the bondo (I did sand alot more to the metal)

Painting...

Finished for now, I think it turned out pretty good for never using the stuff before lol

Now for the 3rd brake light design, thanks to barterj and spy00005 for the idea

Unlit-

Lit up-

Did my gauges red the other day, working on the red turns friday

WOO!! my fav. part of the day actually was seeing how great these decals looked (I do have a mechman 250amp alt)

Unveiling

Drivers side

Passengers Side

So thats where she sits now.

Sorry for the bad quality pics all with my phone, will have my friend (who works for a photography company) take some good ones before the NJ meet sat!
tell me what you think

This post has been edited by mgnt232: Mar 17, 2010 - 7:46 PM

[deathdoakill]

hey bro this is easly fixable if you have a home depot near you or advance auto or autozone in my experience home dpot is the easiest an best to use but they all sell similar stuff wut you need is a liquid solution i dont remember what its called but its in a clear bottle with red lettering an green liquid what you do is brush this solution onto the metal and leave it for five minutes wash with soap and water and reaply if needed this will be one of the only ways to stop the rust as sandig will only clean the surface this solution penatrates through the pores of the metal and temp. seals the metal surface then all you need do is primer then primer seal it or fiberglass but if you dont use this solution an just fiber glass over the rust it will continue to spread under the fiber glass just go to home depot and in the paint isle as the guy for a deruster he can tell you wut it is/where sorry didnt know if anyone else covered this but on my way out an didnt have ebough time to read it as im on the way out if you need the nme i can get for just let me know