SSIII red interior lighting, clock, gauges, dash Options

[Wintersun]

Hi guys, just changed over all my interior lighting to red!

Looks better than stock green/amber?

[Wintersun]

ok guys,

The speedo has had a converter chip wired into the back of the cluster to change it to read MPH from KPH, it also now clock up in miles too.

I used these to change to dials from SSIII amber to Red. ebay red silicon wedge bulb covers
I also used these silicon covers on the 2 bulbs that back light the climate control.

To change the climate control button LEDS form green, I used these 3mm red LEDS Just had to unsolder the old ones and re-solder in the new ones. These LEDs were also used in changing the driver window button light too.

In the cigg lighter I used a 5mm Red LED with a resistor so it would not blow.

The ignition ring light was easy, just pulled out the wedge bulb and uses one of these red ones from here R286 bulb

And finally the clock, I used a deep red lighting gel from a free colour swatch. Cut out a template from the original clock filter and replaced it with the new cut out.