3s swap exhaust setups, looking for info Options

[cjh4l22]

so for everyone who swapped i was curious what sort of exhaust setups you are running as I plan mine. descriptions would be much appreciated as I have several questions.
first. using an aftermarket downpipe, does anyone know if an st185 (all-trac) mid-pipe or b-pipe (goes from downpipe, under axle above under carriage etc..) will fit?? I need that flex section taken care of but I'd prefer not to take it to a shop.
thanks for any advice you might have and info about your current setup.

[boosted185]

so for everyone who swapped i was curious what sort of exhaust setups you are running as I plan mine. descriptions would be much appreciated as I have several questions.
first. using an aftermarket downpipe, does anyone know if an st185 (all-trac) mid-pipe or b-pipe (goes from downpipe, under axle above under carriage etc..) will fit?? I need that flex section taken care of but I'd prefer not to take it to a shop.
thanks for any advice you might have and info about your current setup.

There is a thread somewhere on here that is specifically for custom exhaust setups. Also, if you look at Brent's (SeverX13)thread on his turbo build, there are some pictures on how we set up his downpipe, which was all custom made, and also the rest of his exhaust system. I personally took pictures from Manny's (presure2) thread on his turbo build TO the exhaust shop when I had them do Brent's exhaust. The shop we took Brent's to charged around $300 for a downpipe back setup. HOWEVER, we provided the catalytic converter and also the muffler for them, so that also cut down the costs a little bit.