third brake light idea Now with how to on page 2, take a look Options

[spy00005]

wadda ya think took me a while to get the rite size. gonna change the bulb to make it brighter.







This post has been edited by spy00005: Aug 24, 2009 - 1:46 PM

[barterj]

It has finally stopped raining in Boston and its now sunny So i went out and measured the inside of the third brake light and completed my version of the tail light insert.
Here's a file for whom ever wants it and a how to fit it into your Third brake light. I will post pics later of how mine came out.

Here are the Dimensions for the inside of the brake light:


The dimensions are actually as follows (My AutoCad is set up to round to 2 decimal points):
Length................ 6.125 inches or approx. 15.558 cm
Width.................. 0.875 inches or approx. 2.222 cm
Radius of arc....... 0.438 inches or approx. 1.111 cm

Here is My version, Download and use if you like:


How To Fit to your Brake Light:

1) Right Click and save the design if you like it
2)Open with Paint (for Windows Users), not sure what the comparable program would be for Mac users
3)Print
4)Cut on the white out line(the line that represents the boarders of the inside of the brake light
5)Follow previous How To to get the brake light apart
6)Start with one end and work the paper cut out into the brake light,
*MAKE SURE THAT THE LETTERING ON THE OUTSIDE OF THE BRAKE LIGHT AND THE LETTERS ON THE CUT OUT ARE FACING THE SAME DIRECTION, if you don't the cutout will be upside down*

This post has been edited by barterj: Mar 16, 2010 - 11:18 AM

[mgnt232]

Did your design today.