Started ripping apart the 5sfe, have a question, about turbo position. sum pics also Options

[x_itchy_b_x]

Well everyhting seems to be going good. just messing around macking sure all will fit correctly ect. i have all winter to tinker. the cars off the road. so anyways. the turbo if u look at it how it bolts up the part where the air is blow out of is facing back toward the block. can i twist it up? if so how do i? alos the stock maifold is a bi***. i rounded over like 3 bolts they just held on the heat sheild so now worries.
oh if anyone has 315cc 7MGE injectors ill buy em.

[DG_Performance]

I just reread your problem again and if you are rotating the turbo to move the oil inlet/outlet position the other guys have told you how but if you just want to rotate the intake housing there is an easier way....
You can take the housing snap ring out and then take the intake housing off...then there is a little pin inside the housing area, if you pull that out you can adjust the housing whatever direction you want when you put it back on and it is very easy to do!
You only need a pair of snap-ring pliers and a flat-head screwdriver
Just another possibility????? And you should look at my other point too about the exhaust side that i told you in the last post....
Just trying to help ya out!
dg