Lets get down and dirty with a 2ZZ., Experts only please. Options

[Guest_Jason_*]

A friend and I are looking into taking on a nice project, obviously, attempting to swap a 2ZZ(GTS) into my current 7A(ST). This good friend of mine did the swap on my previous Integra, has alot of knowledge on welding and fabricating etc, but not neccessarily in wiring (which can be dealth with at a later time). We just "out of the blue" started thinking about doing such a swap as a fun project to attempt. We just want to look into some of the difficulties we may run in to before we actually run into the situation with no way out. Basically, trying to plan out all of our problems ahead of time, so that when we reach them, we have a planned method of working around them.

What i'm asking is, if anybody can give me some possible difficulties we may run into and some helpful solutions to getting around them or making them work, please help. Our most obvious is Engine Mounts, but we aren't worried about that at all really, its pretty easy to weld new mounts on. The good thing on this is that all work is going to be done by him, making installation free unless we run into some severe difficulties. Through me some ideas guy...

We are currently trying to get our hands on a low-mileage 2ZZ.

I'm going to go ahead and come out on a limb and say right off the bat we are looking into custom axle's (unless a GT would work), relocated engine mounts, and transmission.

[GeEkBoY]

you may want to consider an aftermarket ecu to control the engine and leave the stock one to take care of the other systems. This could help with the compatability issues.