Which is power/ground for preface fog, need help asap Options

[captb]

k, im wiring in my new fogs(94-95 oem) at the moment and wanted to know if im doing it correctly. im hooking up the red to positive(+) and white to ground(-). am i correct or do i have it backwards?

thanks in advance.

[captb]

if its just a bulb, the order doesnt matter. you only have to match + and - for leds or hid's ballasts.

thanks, i think its similar to a highbeam/low beam kinda bulb

I have the wiring diagrams for all 6 series Celica's and one question first. You state 94-95 OEM fogs and there is no such thing if your bumper is stock North American 94 or 95 as the fogs didn't come out until 96. Unless you have a Asian-European model and then there are two different diagrams depending on if they are angled or round. If you can tell me exactly what you actually have I will post the diagram for you.

i am installing jdm round fogs (94-95) into a usdm 94-95 vehicle. hope that helps. im doing all the wiring externally, including relay and fuses.

This post has been edited by captb: Mar 28, 2010 - 5:59 PM