Which is power/ground for preface fog, need help asap Options

[captb]

k, im wiring in my new fogs(94-95 oem) at the moment and wanted to know if im doing it correctly. im hooking up the red to positive(+) and white to ground(-). am i correct or do i have it backwards?

thanks in advance.

[captb]

Ok, so I'm guessing you're using a seperate switch not the OEM turn signal stalk with fog light position? The lamp for the OEM fogs is a 12V 55W, HALOGEN with a single connection spade for power (red) and a rim ground (white). If you're adding a 96+ OEM turn stalk with fog lights you're in for a lot of work! But I can still post the wiring diagram for the conversion if you need it. Took me a month to wire a 96 OEM turn with fogs stalk to my 94. If I had to do it again I'd use an aftermarket wiring kit and put an OEM round switch in the drivers side vent knock out. Takes about 2 hours!

correct. like you recommended, ill switch over to an oem round switch if one ever comes up, but for now its connected to a toggle switch.

you also might want to consider making a new thread with all the diagrams you have between USDM, jdm, and euro. im sure it will be of use to alot of people now or in the future. they'll probably make it a sticky.

also, how in the world do you take the bulb out. i couldnt get it from the back, and the thing is completely sealed in the front. im thinking going with a yellow color bulb.