![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
Going to check why all of a sudden my airbag light went on today. only thing I changed was the accent light bulb. This is the info I pulled out from the search function.
1. Air bag sensor up front, where is this located? 2. TC and E1 gives you the code 3. Someone else with the second O2 sensor plug came off and got the code, donno how this is related. 4. Can i just unplug and replug the yellow harness back into the airbag ECU? 5. I also see a yellow harness up front near the headlights, I assume this is the other end of where the airbag harness that goes to the sensor (maybe got loose)? 6. Pull out the SRS fuse but this is not a true fix or workaround, more like an ignore and doesn't fix the problem. 7. Someone posted this: Ignition / radio/cig lighter fuses. Here is what it actually says "WHEN THE IGNITION SW IS TURNED TO ACC OR ON, CURRENT FROM THE CIG & RAD FUSE FLOWS TO TERMINAL 14 OF THE CENTER AIRBAG SENSOR ASSEMBLY. ONLY WHEN THE IGNITION SW IS ON DOES, CURRENT FROM THE IGN FUSE FLOWS TO TERMINAL 13" any additional info is gladly appreciated. -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
I really think I just loosened the front sensor harness or something with the wires cus thats the area I was working at the other day, for people with airbag experience, can I just disconnect the battery, remove and replug the pass side air bag sensor and the code will clear itself if the error is corrected or is the error something that stays on until manually reset by jumping the connectors. Can't I just remove the fuse to reset the code or just by disconnecting the battery? I'm not planning on working on the entire airbag system, just the harness of the pass side air bag sensor area.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 12:48 AM |