![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jul 31, '03 From GA Currently Offline Reputation: 0 (0%) ![]() |
heres some pics my buddy took of my car with the new rollers
![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jul 31, '03 From GA Currently Offline Reputation: 0 (0%) ![]() |
Ok,
To answer the questions: The wheels are 18x7.5 5Zigen Copse witha +35 offset with Falken Azenis 245/40/18 tires. My suspension set up is stock struts with Ground Control coilovers. Before I put them on I had the coilovers lowered about 3.5 inches. When jacking it down all tires were hitting. I ended up rasing it about 1.5-2 inches. Driving around on these bouncy shocks and turning hard I still scrub a little so I'm going to have to raise it about another 1/2 inch. Hopefully when I replace my struts I can lower it again as it seems to high for me now that I'm used to being lowered 3.5" on 14" wheels. Because of that scrubbing issue I recomend getting a +38 offset compared to a +35 that I have. The recomendations for our car is +35 to +42. Cormudgen |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 3:45 PM |