 Johnnehh needs HALP, >.< |
 Apr 5, 2010 - 10:37 PM
|
 
|
 Enthusiast  Joined Aug 5, '09 From Oakley, CA Currently Offline Reputation: 15 (100%)  |
Heyyy. I got new tires mounted and got everything balanced on the new Rotas, and when I was washing the car today and wiring up the fogs, I noticed something...
The front wheel on the driver side sits flush with the fender, and the front wheel on the passenger side is a little "sucked in". I would say there is about an inch difference.     Any ideas? 
-------------------- 1996 Toyota Celica GT (GT4 conversion) - SOLD :(
2002 Audi A4 1.8T Quattro - Daily Driver |
 |
Replies
|
Apr 6, 2010 - 12:15 AM
|
|
 Enthusiast Joined Jul 13, '09 Currently Offline Reputation: 9 (91%) |
i had that problem once and it turned out to be a bent lower control arm, $300 later it was fixed.....
-------------------- You're here for a good time, not a long time. - Colin McRae When in doubt... Flat out! - Colin McRae Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you.... |
Posts in this topic
johnnehh Johnnehh needs HALP Apr 5, 2010 - 10:37 PM
whatthe First things first make sure the wheels are the sa... Apr 5, 2010 - 11:16 PM 808celica your toe could be off a little. you got camber bol... Apr 6, 2010 - 3:59 AM whatthe Firstly why is there a baby? Apr 6, 2010 - 5:02 AM Keiri QUOTE (whatthe @ Apr 6, 2010 - 6:02 ... Apr 6, 2010 - 9:26 AM
CAMAricer Fact: Babes in any pictures adds +2 to coolness.
... Apr 6, 2010 - 10:14 AM johnnehh It's my buddy's kid. He works at best buy ... Apr 6, 2010 - 10:43 AM terbear4god4life i think i have this issue too but my offsets fine Apr 6, 2010 - 10:49 AM flyinglizard It's not the toe or an alignment issue because... Apr 6, 2010 - 11:19 AM Tech-Nics QUOTE (johnnehh @ Apr 5, 2010 - 11:3... Apr 7, 2010 - 2:57 PM johnnehh Eh. Brought it to the bodyshop. Same thing that ha... Apr 7, 2010 - 7:01 PM ajmorris1977 QUOTE (johnnehh @ Apr 7, 2010 - 8:01... Apr 7, 2010 - 7:41 PM D-Man STEP 1: Remove baby (or give it a wrench)
STEP 2: ... Apr 7, 2010 - 7:14 PM johnnehh QUOTE (ajmorris1977 @ Apr 7, 2010 - 7... Apr 7, 2010 - 8:22 PM GriffGirl Okay, you have a bent lower control arm? This isn... Apr 7, 2010 - 8:22 PM hatchy_gt-s Why has nobody thought that Tech-Nics has the RIGH... Apr 7, 2010 - 9:57 PM johnnehh QUOTE (hatchy_gt-s @ Apr 7, 2010 - ... Apr 7, 2010 - 11:23 PM easternpiro1 how did it look before you got the rotas?
and D-m... Apr 7, 2010 - 11:43 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 1:36 PM |