Apr 10, 2010 - 6:31 PM
|
|
|
Enthusiast ![]() Joined Mar 13, '10 From New Iberia Currently Offline Reputation: 0 (0%) |
Ok so while I was painting my gt, I had a couple of runs about an inch and a half long. Its dried up and I was wondering if there is any way I can remove them? I used a razor to shave them off and sanded with 400 grit then 1500 grit sandpaper. Im waiting until tomorrow to spray over it. Am I missing any steps?
|
![]() |
Apr 12, 2010 - 9:46 PM
|
|
|
Enthusiast ![]() Joined Mar 13, '10 From New Iberia Currently Offline Reputation: 0 (0%) |
Im going to be careful when color sanding and buffing. It will be done before next weekend though(prom weekend) I think it would be cool to drive there in a nice celica, rather than the usual limo IMO
|
Scosh Removing dry paint runs? Apr 10, 2010 - 6:31 PM
str8thugginit4ya Sounds about right, but I think that 400 grit migh... Apr 10, 2010 - 6:44 PM
Scosh Im talking about the actual paint that ran. I didn... Apr 10, 2010 - 7:10 PM
Badkarma you may have to scuff all the basecoat(color) that... Apr 10, 2010 - 7:34 PM
Scosh I have frost white, would i have to spray another ... Apr 10, 2010 - 10:13 PM
Scosh Also the only sandpaper I have to work with is 320... Apr 10, 2010 - 10:21 PM
str8thugginit4ya QUOTE (Scosh @ Apr 10, 2010 - 10:21 ... Apr 12, 2010 - 8:04 PM
Scosh I have the paint job done and the clear is drippin... Apr 12, 2010 - 8:09 PM
Badkarma sorry didnt get back to you in time. if you are se... Apr 12, 2010 - 8:36 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 12:01 AM |