 WTB: 3s or BEAMs, lol just curious whats out there. |
 Apr 19, 2010 - 8:59 AM
|
 
|
 Enthusiast  Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%)  |
So im pretty sure my 2.2 just crapped out on me, and im looking into getting a 2nd or 3rd gen 3s or a BEAMs. And hopefully just using my stock tranny with a upgraded clutch and flywheel. So if anyone could tell me who to talk to about doing the swap and so on please let me know, and i would like to get my hands on one with the uncut wiring harness please. Thanks in advance for any help i get. And im looking to do this asap i have the money saved up to do so, and this is my daily so im looking to get it back on the road as soo as possible, so i figure if im going to have to put another engine in why not put in a 3s.or a BEAMs. AS if someone could point me in the right direction it would be greatly appreciated.
This post has been edited by JuMPiiN: Apr 19, 2010 - 9:03 AM |
 |
Replies
|
Apr 20, 2010 - 3:06 PM
|
|
 Enthusiast Joined Mar 26, '09 From Minnesota Currently Offline Reputation: 5 (100%) |
Truth. He did ask for advice though, so advice was given. 3S is the way to go if you plan on making 300+ whp in the future. I don't think 300 whp is an insane amount of power. It' also depends on what dyno is being used.
This post has been edited by Nartanian: Apr 20, 2010 - 3:07 PM -------------------- "God created turbo lag to give V8's a chance"
 |
|
Apr 20, 2010 - 3:14 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
QUOTE (Nartanian @ Apr 20, 2010 - 4:06 PM)  Truth. He did ask for advice though, so advice was given. 3S is the way to go if you plan on making 300+ whp in the future. I don't think 300 whp is an insane amount of power. It' also depends on what dyno is being used. i guess...... Anyway......... I'm outta this thread. Good luck to OP. This post has been edited by samir0189: Apr 20, 2010 - 3:16 PM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
Posts in this topic
JuMPiiN WTB: 3s or BEAMs Apr 19, 2010 - 8:59 AM
TerBeau QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59... Apr 19, 2010 - 4:33 PM
JuMPiiN QUOTE (TerBeau @ Apr 19, 2010 - 4:33... Apr 19, 2010 - 5:15 PM
TerBeau QUOTE (JuMPiiN @ Apr 19, 2010 - 6:15... Apr 19, 2010 - 9:19 PM TerBeau QUOTE (TerBeau @ Apr 19, 2010 - 5:33... Apr 19, 2010 - 10:03 PM njccmd2002 buy from ebay and there are three swapped beams th... Apr 19, 2010 - 5:08 PM _Jim_ Personally, I think think the beams is a waste of ... Apr 19, 2010 - 5:39 PM JuMPiiN The only reason I'm how do you say sketchy, ab... Apr 19, 2010 - 7:34 PM _Jim_ QUOTE (JuMPiiN @ Apr 19, 2010 - 8:34... Apr 19, 2010 - 7:54 PM JuMPiiN QUOTE (_Jim_ @ Apr 19, 2010 - 7:54 P... Apr 19, 2010 - 7:59 PM _Jim_ QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59... Apr 19, 2010 - 8:13 PM njccmd2002 beams engine is a simple drop in engine.
Yes, 3sg... Apr 19, 2010 - 7:48 PM JuMPiiN QUOTE (njccmd2002 @ Apr 19, 2010 - 7... Apr 19, 2010 - 7:55 PM _Jim_ QUOTE (njccmd2002 @ Apr 19, 2010 - 8... Apr 19, 2010 - 8:03 PM Ted95 QUOTE (_Jim_ @ Apr 19, 2010 - 9:03 P... Apr 19, 2010 - 8:39 PM njccmd2002 i retract myself and any future beams vs boost. co... Apr 19, 2010 - 8:16 PM JuMPiiN Alright and could i do the swap myself in about a ... Apr 19, 2010 - 8:18 PM richee3 BOOST!!!!!!!! Apr 19, 2010 - 8:26 PM hurley97 A lot of the things you're concerned about wit... Apr 19, 2010 - 9:09 PM JuMPiiN I actually emailed that guy and he told me he... Apr 19, 2010 - 10:43 PM Ted95 QUOTE (JuMPiiN @ Apr 19, 2010 - 11:4... Apr 20, 2010 - 5:58 AM njccmd2002 if you going beams, please, please read my signatu... Apr 19, 2010 - 11:14 PM JuMPiiN Appreciate it, He says he has everything. What all... Apr 20, 2010 - 8:23 AM Ted95 QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23... Apr 20, 2010 - 1:08 PM hurley97 QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23... Apr 20, 2010 - 5:10 PM _Jim_ GL with the Beams Jumpin, let us know how it goes.... Apr 20, 2010 - 2:28 PM samir0189 QUOTE (_Jim_ @ Apr 20, 2010 - 3:28 P... Apr 20, 2010 - 2:44 PM njccmd2002 QUOTE (_Jim_ @ Apr 20, 2010 - 2:28 P... Apr 20, 2010 - 5:28 PM JuMPiiN Wait.... so Jim your saying i could honestly just ... Apr 20, 2010 - 4:47 PM _Jim_ QUOTE (JuMPiiN @ Apr 20, 2010 - 5:47... Apr 20, 2010 - 7:24 PM JuMPiiN QUOTE (_Jim_ @ Apr 20, 2010 - 7:24 P... Apr 20, 2010 - 7:37 PM _Jim_ njccmd2002, there is no attitude on my end, nor is... Apr 20, 2010 - 7:41 PM JuMPiiN Anyone reccommend and place to order a good condit... Apr 20, 2010 - 8:19 PM _Jim_ QUOTE (JuMPiiN @ Apr 20, 2010 - 8:19... Apr 20, 2010 - 8:45 PM hurley97 If you were concerned about boost before, probably... Apr 20, 2010 - 8:52 PM JuMPiiN Ha well luckily for me in my state there really is... Apr 20, 2010 - 10:27 PM njccmd2002 believe me, the wiring part is easy. Apr 20, 2010 - 10:29 PM JuMPiiN I just want to know exactly how much it would cost... Apr 20, 2010 - 10:44 PM Toyota_Celica_97 just my opion if ima do a swap and had the money, ... Apr 20, 2010 - 11:38 PM JuMPiiN I actually looked at that clip and called about it... Apr 20, 2010 - 11:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 19th, 2025 - 4:22 AM |