Apr 19, 2010 - 8:59 AM
		 | 
		
			
			 | 
	
| 
		    
				
				
				
				
				
				
        	
        	 Enthusiast ![]() ![]() ![]() ![]() Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%)  | 
       
			
			 
				So im pretty sure my 2.2 just crapped out on me,  and im looking into getting a 2nd or 3rd gen 3s or a BEAMs. And hopefully just using my stock tranny with a upgraded clutch and flywheel. So if anyone could tell me who to talk to about doing the swap and so on please let me know, and i would like to get my hands on one with the uncut wiring harness please. Thanks in advance for any help i get. And im looking to do this asap i have the money saved up to do so, and this is my daily so im looking to get it back on the road as soo as possible, so i figure if im going to have to put another engine in why not put in a 3s.or a BEAMs. AS if someone could point me in the right direction it would be greatly appreciated.
				 
			
			
					
		This post has been edited by JuMPiiN: Apr 19, 2010 - 9:03 AM  | 
	
![]()  | 
	
			
			   Apr 20, 2010 - 11:49 PM
		 | 
		
			
			 | 
	
| 
		    
				
				
				
				
				
				
        	
        	 Enthusiast ![]() ![]() ![]() ![]() Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%)  | 
       
			
			 
				I actually looked at that clip and called about it and no one answered the calls on PMs. Honestly i think either a 5s is good for a DD with a turbo down the road or that Redtop beams..... It may only have 200 horse's but man oh man i think it looks so sick and sounds awsome. And it honestly puts me in my exact power range the Redtop and the turbo'd 5s.
				
				
				
			 
			
			
					
		 | 
	
 JuMPiiN   WTB: 3s or BEAMs   Apr 19, 2010 - 8:59 AM
 
 TerBeau   QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59...   Apr 19, 2010 - 4:33 PM
 
 JuMPiiN   QUOTE (TerBeau @ Apr 19, 2010 - 4:33...   Apr 19, 2010 - 5:15 PM

 
 TerBeau   QUOTE (JuMPiiN @ Apr 19, 2010 - 6:15...   Apr 19, 2010 - 9:19 PM
 
 TerBeau   QUOTE (TerBeau @ Apr 19, 2010 - 5:33...   Apr 19, 2010 - 10:03 PM
 
 njccmd2002   buy from ebay and there are three swapped beams th...   Apr 19, 2010 - 5:08 PM
 
 _Jim_   Personally, I think think the beams is a waste of ...   Apr 19, 2010 - 5:39 PM
 
 JuMPiiN   The only reason I'm how do you say sketchy, ab...   Apr 19, 2010 - 7:34 PM
 
 _Jim_   QUOTE (JuMPiiN @ Apr 19, 2010 - 8:34...   Apr 19, 2010 - 7:54 PM
 
 JuMPiiN   QUOTE (_Jim_ @ Apr 19, 2010 - 7:54 P...   Apr 19, 2010 - 7:59 PM
 
 _Jim_   QUOTE (JuMPiiN @ Apr 19, 2010 - 8:59...   Apr 19, 2010 - 8:13 PM
 
 njccmd2002   beams engine is a simple drop in engine.
Yes, 3sg...   Apr 19, 2010 - 7:48 PM
 
 JuMPiiN   QUOTE (njccmd2002 @ Apr 19, 2010 - 7...   Apr 19, 2010 - 7:55 PM
 
 _Jim_   QUOTE (njccmd2002 @ Apr 19, 2010 - 8...   Apr 19, 2010 - 8:03 PM
 
 Ted95   QUOTE (_Jim_ @ Apr 19, 2010 - 9:03 P...   Apr 19, 2010 - 8:39 PM
 
 njccmd2002   i retract myself and any future beams vs boost. co...   Apr 19, 2010 - 8:16 PM
 
 JuMPiiN   Alright and could i do the swap myself in about a ...   Apr 19, 2010 - 8:18 PM
 
 richee3   BOOST!!!!!!!!   Apr 19, 2010 - 8:26 PM
 
 hurley97   A lot of the things you're concerned about wit...   Apr 19, 2010 - 9:09 PM
 
 JuMPiiN   I actually emailed that guy and he told me he...   Apr 19, 2010 - 10:43 PM
 
 Ted95   QUOTE (JuMPiiN @ Apr 19, 2010 - 11:4...   Apr 20, 2010 - 5:58 AM
 
 njccmd2002   if you going beams, please, please read my signatu...   Apr 19, 2010 - 11:14 PM
 
 JuMPiiN   Appreciate it, He says he has everything. What all...   Apr 20, 2010 - 8:23 AM
 
 Ted95   QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23...   Apr 20, 2010 - 1:08 PM
 
 hurley97   QUOTE (JuMPiiN @ Apr 20, 2010 - 9:23...   Apr 20, 2010 - 5:10 PM
 
 _Jim_   GL with the Beams Jumpin, let us know how it goes....   Apr 20, 2010 - 2:28 PM
 
 samir0189   QUOTE (_Jim_ @ Apr 20, 2010 - 3:28 P...   Apr 20, 2010 - 2:44 PM
 
 njccmd2002   QUOTE (_Jim_ @ Apr 20, 2010 - 2:28 P...   Apr 20, 2010 - 5:28 PM
 
 Nartanian   Truth. He did ask for advice though, so advice was...   Apr 20, 2010 - 3:06 PM
 
 samir0189   QUOTE (Nartanian @ Apr 20, 2010 - 4...   Apr 20, 2010 - 3:14 PM
 
 JuMPiiN   Wait.... so Jim your saying i could honestly just ...   Apr 20, 2010 - 4:47 PM
 
 _Jim_   QUOTE (JuMPiiN @ Apr 20, 2010 - 5:47...   Apr 20, 2010 - 7:24 PM
 
 JuMPiiN   QUOTE (_Jim_ @ Apr 20, 2010 - 7:24 P...   Apr 20, 2010 - 7:37 PM
 
 _Jim_   njccmd2002, there is no attitude on my end, nor is...   Apr 20, 2010 - 7:41 PM
 
 JuMPiiN   Anyone reccommend and place to order a good condit...   Apr 20, 2010 - 8:19 PM
 
 _Jim_   QUOTE (JuMPiiN @ Apr 20, 2010 - 8:19...   Apr 20, 2010 - 8:45 PM
 
 hurley97   If you were concerned about boost before, probably...   Apr 20, 2010 - 8:52 PM
 
 JuMPiiN   Ha well luckily for me in my state there really is...   Apr 20, 2010 - 10:27 PM
 
 njccmd2002   believe me, the wiring part is easy.   Apr 20, 2010 - 10:29 PM
 
 JuMPiiN   I just want to know exactly how much it would cost...   Apr 20, 2010 - 10:44 PM
 
 Toyota_Celica_97   just my opion if ima do a swap and had the money, ...   Apr 20, 2010 - 11:38 PM![]() ![]()  | 
	
| Lo-Fi Version | Time is now: November 4th, 2025 - 10:03 AM |