hazard switch as a fog switch?, can it be done? Need help... Options

[samir0189]

Ok well let me start off by saying i am an electrical noob.

I have a spare hazard switch with a pigtail, and i have some prefacelift fogs im gonna eventually wire in, and id like to use the spare hazard switch to do that, if possible.

Does anyone know how i'd go about doing this? Any pinouts for the switch..... ? is it even possible? Any help? thanks.

[samir0189]

There is three wires you can use from the spare hazard. 1 to the battery, 1 for the ground & 1 to the fog light. Honestly you are much better off just getting a cheap $7 fog light wiring harness that comes with the fuse built into the wire. That's what I used for my GT-4 fog lights. The cool thing is the switch that came with the wire harness lights up when the fog lights are on. So I know when the fog lights are on or I don't forget to turn them off.

Like this: http://www.gizmosforall.com/images/frracingwirekit.jpg

^^^ The one I got didn't even need the relay. It had a tube fuse built into the wire to the battery.

i know of these, but i was kinda hoping to get more of an oem look, those kits are a last resort.

Someone has done this before. I can figure out the pin diagram for you tomorrow. It wouldn't be hard at all. If you figure out how to get rid of the triangles on the hazard switch, I would do the same thing.

I'll get back to you with those pin diagrams tomorrow.

i would greatly appreciate that.

i have done it on a amplifer,i even gots lights, muah muah muah.

Dont remember the plugs.

As a matter of fact i took the switch apart and made my own judgement call and it worked.....

but i cant even see how to take the thing apart... hmmmm.

well if it happens to come back to you, please let me know, thanks.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And so, as far as wiring goes, do i need to put these on a fuse....? or what? I guess i could google and find out..

This post has been edited by samir0189: Apr 24, 2010 - 12:34 PM