6G Celicas Forums

Welcome Guest ( Log In | Register )

> Need Help Installing Amp
post Apr 25, 2010 - 9:15 PM
+Quote Post
Scosh

Enthusiast
*
Joined Mar 13, '10
From New Iberia
Currently Offline

Reputation: 0 (0%)




Ok so I am trying to install my Rockford Fosgate Amp and the only problem I have is finding the firewall so I can put the power cable through my car. Any help guys/girls? I tried searching on here, but came up empty handed. Pictures would be great.
 
Start new topic
Replies
post Apr 25, 2010 - 9:47 PM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




Look to the driver's side of the firewall. Roughly directly in line with the battery is a thin blue wire going into the firewall. I put my 8 gauge power wire through there, and it works perfectly seeing as there's already a sizable hole and a grommet to cover the bare metal. The wire should come out somewhere above the dead pedal (foot rest).

This also sets up the wire nicely to be routed through the left of the car. Just take off the kick panel, door sill (there are plastic boxes under the sill that contain wiring, there's a handy few guide hooks attached to the boxes that you can snap the power wire into; you'll see what I mean when you've removed it) , move the rear speaker panel out of the way, and route the wire under the driver's side panel in the trunk. Then just hide all of the wires under the carpet. smile.gif



This post has been edited by SwissFerdi: Apr 25, 2010 - 10:09 PM


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'90 MX-5 Mariner Blue
'93 MX-5 LE
'07 Kawasaki Eliminator 125 silver
'15 Optima Grey
'04 206 GTi silve

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 14th, 2025 - 10:08 AM