![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
ok so i have heard that when i replace my stock suspension with the coilovers i will need new endlinks, what do i use? i plan on using the megan coilovers and i have been told that there are only ceartian endlinks you can use? help?
This post has been edited by 96stgreendemon: Apr 29, 2010 - 1:12 PM -------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%) ![]() |
i've got both front and back suspension tech sway bars and the cars a blast to drive. i can't comment on if it is/isn't better with just the rear since i bought and installed both at the same time. the rears had different mounting points though...one for more oversteer and one for more understeer. i wouldn't know how much of a difference it makes though since i set/kept it at more oversteer. the backs pretty straight forward, i didn't have to move much iirc. for the front, i dropped the subframe just a bit to get the thing in there as its so much thicker (not to mention stiffer) than the stock. not sure if you HAVE to but i did it cus it was easier for me (lift+air tools). these sway bars coupled with tanabe coils are fun...if only the car wasn't so nose heavy it would be even better lol
-bboy -------------------- ![]() ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
![]() ![]() |
Lo-Fi Version | Time is now: June 26th, 2025 - 9:30 AM |