 Not getting power to CD player? Help wanted!! |
 Apr 28, 2010 - 11:14 PM
|
 
|
 Enthusiast  Joined Apr 20, '10 From Fremont, Ne Currently Offline Reputation: 0 (0%)  |
Ok... so I was installing an aftermarket cd player today and it flashed on then turned off and now the factory player (without wiring harness) wont even work. I tested the aftermarket cd player on an independant power source and it works. I tested the ground and thats good. I can only assume the issue lyes with the power. I believe the power source comes through the factory amp but could I have fried the amp? I commute 30 minutes to work everyday... it would suck with out music! Any help would be apperciated!
Thank you AuffyZ |
 |
Replies
|
May 2, 2010 - 7:06 PM
|
|
|
Enthusiast Joined Apr 20, '10 From Fremont, Ne Currently Offline Reputation: 0 (0%) |
So I decided to hard wire all the audio! It took a little over 4 hours to rewire the front and rear speakers but its done right and well!!! I used high quality car audio speaker wire and ran the constant and ground from the deck directly to the battery. I couldn't have figured it out so quickly without the help from everyone!!! Thanks for all the suggestions and ideas!
AuffyZ |
Posts in this topic
AuffyZ Not getting power to CD player? Help wanted!! Apr 28, 2010 - 11:14 PM
Euphoria Does the clock work? have you checked fuses? Apr 28, 2010 - 11:27 PM D-Man fuse
[/thread] Apr 28, 2010 - 11:30 PM AuffyZ Clock works, hazards work, everything works but ra... Apr 28, 2010 - 11:30 PM
D-Man QUOTE (AuffyZ @ Apr 28, 2010 - 11:30... Apr 28, 2010 - 11:49 PM AuffyZ I'll have to try replacing the fuses... Questi... Apr 29, 2010 - 12:00 AM zonz540 Check the dome light fuse... It puts power to the ... Apr 29, 2010 - 12:31 AM azian_advanced i fried my amp when i was installing my stereo... ... Apr 29, 2010 - 12:59 AM AuffyZ So this morning I got in my car and the factory st... Apr 29, 2010 - 8:05 AM 96stgreendemon sounds like a blown amp in either the car or the r... Apr 29, 2010 - 10:10 AM SoDo Get a multimeter and test your lines. Doesnt matt... Apr 29, 2010 - 11:43 AM Espo You should bypass the factory amp when installing ... Apr 29, 2010 - 2:02 PM AuffyZ I'll have to check the Dome fuse... I replaced... Apr 29, 2010 - 9:54 PM Espo Check your radio fuses in your engine bay and your... Apr 30, 2010 - 7:24 PM captb dont mean to be captain obvious but did you check ... May 1, 2010 - 12:37 AM Espo Excellent, glad we could help! May 5, 2010 - 1:26 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 17th, 2025 - 1:38 PM |