6G Celicas Forums

Welcome Guest ( Log In | Register )

> looking for coomers 4age swap thread, already searched
post May 1, 2010 - 12:52 AM
+Quote Post
96stgreendemon



Enthusiast
*****
Joined Oct 7, '09
From Northern kentucky
Currently Offline

Reputation: 8 (90%)




so for the past hour i have searched and searched for his thread on swapping the 4age into the st, if anyone could locate a link for me that would be great, and if you plan on being a dick and telling me to search you can post in another thread


--------------------
1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3

2001 Solar yellow Lexus IS300

2001 Dodge ram 1500 Off-road edition
 
Start new topic
Replies
post May 6, 2010 - 7:46 AM
+Quote Post
soulshadow



Enthusiast
*****
Joined Apr 18, '05
From Lincoln, Ar
Currently Offline

Reputation: 7 (100%)




You need a throttle cable from a 5s Camry and a way to wield on the 4age down pipe to your exhaust system because they don't fit. You will also need a custom hose going from the power steering to your rack and pinion and a custom A/C line to the pump. Don't forget your wiring harness as well. Those are pretty much what you need. Anything else is a direct fit such as the motor mounts and your old axels.
post May 6, 2010 - 10:31 AM
+Quote Post
SwissFerdi

Enthusiast
*****
Joined Jun 18, '09
From Orlando
Currently Offline

Reputation: 8 (100%)




QUOTE (soulshadow @ May 6, 2010 - 8:46 AM) *
You need a throttle cable from a 5s Camry and a way to wield on the 4age down pipe to your exhaust system because they don't fit. You will also need a custom hose going from the power steering to your rack and pinion and a custom A/C line to the pump. Don't forget your wiring harness as well. Those are pretty much what you need. Anything else is a direct fit such as the motor mounts and your old axels.


Not that hard of a swap then...I figure the cost for all of those custom parts is around 500?


--------------------
'97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE
post May 7, 2010 - 8:16 AM
+Quote Post
soulshadow



Enthusiast
*****
Joined Apr 18, '05
From Lincoln, Ar
Currently Offline

Reputation: 7 (100%)




QUOTE (SwissFerdi @ May 6, 2010 - 10:31 AM) *
QUOTE (soulshadow @ May 6, 2010 - 8:46 AM) *
You need a throttle cable from a 5s Camry and a way to wield on the 4age down pipe to your exhaust system because they don't fit. You will also need a custom hose going from the power steering to your rack and pinion and a custom A/C line to the pump. Don't forget your wiring harness as well. Those are pretty much what you need. Anything else is a direct fit such as the motor mounts and your old axels.


Not that hard of a swap then...I figure the cost for all of those custom parts is around 500?


yeah but you gotta replace the old water-pump, timing belt, spark plugs, a full tune up, misc parts here and there and eventually you need around $1000-1500. Toyota quotes 20V pumps at $300 and wire set at $200.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 3rd, 2025 - 1:05 PM