 BEAMS turns but wont start |
 May 9, 2010 - 6:13 PM
|
 
|
|
Enthusiast  Joined Oct 26, '09 From Florida Currently Offline Reputation: 2 (100%)  |
i have read through everything turnip has done in his thread to try to figure out why my beams wont start. i just so happen to own a 94gt myself. i have tested spark, fuel pump, etc. but it seems like the fuel pump doesnt get a signal to pump gas in. i have also noticed that when i do get it to sputter the rpm gauge doesnt move. and also that my radio doesnt turn on anymore. any help/advice is very appreciated
|
 |
Replies
|
May 10, 2010 - 3:45 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
ok, my error was, under the intake there are a lot of grounds that are for the coils, i did not tight those, my car started after that, the other is if you do not bridge the 14 and 17 wires in the main plug.
pull the codes and see what. I hope is not the ecu. recheck all wiring. its always something simple -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
May 10, 2010 - 6:50 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
QUOTE (njccmd2002 @ May 10, 2010 - 4:45 PM)  ok, my error was, under the intake there are a lot of grounds that are for the coils, i did not tight those, my car started after that, the other is if you do not bridge the 14 and 17 wires in the main plug. pull the codes and see what. I hope is not the ecu. recheck all wiring. its always something simple usually something simple  did you move the clutch start switch wire to the correct plug and pin ? also, the stock rpm gauge won't work witht he beams, either use a beams dial or use a signal adapter. -------------------- |
|
May 10, 2010 - 9:18 PM
|
|
 Enthusiast Joined Aug 24, '09 Currently Offline Reputation: 1 (100%) |
QUOTE (Batman722 @ May 10, 2010 - 7:50 PM) QUOTE (njccmd2002 @ May 10, 2010 - 4:45 PM) ok, my error was, under the intake there are a lot of grounds that are for the coils, i did not tight those, my car started after that, the other is if you do not bridge the 14 and 17 wires in the main plug. pull the codes and see what. I hope is not the ecu. recheck all wiring. its always something simple usually something simple did you move the clutch start switch wire to the correct plug and pin ? also, the stock rpm gauge won't work witht he beams, either use a beams dial or use a signal adapter. I agree. I believe that was the exact symptoms I was having when i tried the key the first time. Thanks again Batman for the help. Should be starting a new thread shortly as I am about to start project #2. Picking up the donor chassis on Thursday. |
Posts in this topic
94GreenLantern BEAMS turns but wont start May 9, 2010 - 6:13 PM
njccmd2002 start with pulling out the codes, then check wirin... May 9, 2010 - 11:52 PM 94GreenLantern How do I pull the codes? And where would I look th... May 10, 2010 - 1:20 AM hurley97 using the diagnostic box in the engine bay, put on... May 10, 2010 - 9:56 AM 94GreenLantern went to garage to test a couple of more things out... May 10, 2010 - 2:49 PM 94GreenLantern Yeah I moved the Clutch Start wire and I bridged 4... May 11, 2010 - 10:27 AM 94GreenLantern tested a bunch of relays and they all seem good, i... May 13, 2010 - 1:03 PM njccmd2002 did you modify the wiring harness in any other way... May 13, 2010 - 2:19 PM 94GreenLantern i didnt even extend the harness. all fuses checked... May 14, 2010 - 12:03 PM stephen_lee if it runs w/ starter fluid its getting spark... May 14, 2010 - 12:34 PM Outsider The bridge on EA1 is from pin 4 to pin 17. Mine wo... May 14, 2010 - 11:49 PM 94GreenLantern the motor is alive and running. just need to get a... May 19, 2010 - 1:11 AM Rusty so what was the cause, the battery? May 19, 2010 - 1:17 AM njccmd2002 yeaH, we demand to know!
videos or this thr... May 19, 2010 - 9:27 AM zhu_2012 黄河石柴油机... May 19, 2010 - 8:34 PM 94GreenLantern ^^^translate? i will post videos after i get my ta... May 20, 2010 - 11:35 PM
turnip QUOTE (94GreenLantern @ May 21, 2010 - 1... May 22, 2010 - 9:25 PM Rusty uhh just left over spam from yesterday... May 20, 2010 - 11:38 PM 94GreenLantern Power steering leak seems to be solved, now I got ... May 28, 2010 - 10:04 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 18th, 2025 - 2:19 PM |