RT-P REAR 3 Point strut brace, Prototype and test fit so far Options

[yellowchinaman]

Most of you may remember we made an impressive front 3 point strut brace and there was talks of a rear to match. Well here's our upreated 3pt strut brace. Made to the same spac as our front 3 point strut brace using matching rod sizes.


Some minor adjustments and changes will be made for the final product but overall I'm well happy with the prototype. (excuse the boot clutter)





compared to my 2 post cusco brace:


This post has been edited by yellowchinaman: May 12, 2010 - 1:48 AM

[yellowchinaman]

we've never fitted this to a vert so cant comment. but if the seats are the same than the middle anchor for the back rest should be the same and thats where it's bolted to at the bottom.
however if the rear top moints are located differently then it wont fit.
otherwise we're offering this to fit gt4 coupes and na coupes. course we will test fit to a vert if we ever get a chance to come across one in the uk and if it does fit then it'll be a bonus.

[Tom_SS2]

we've never fitted this to a vert so cant comment. but if the seats are the same than the middle anchor for the back rest should be the same and thats where it's bolted to at the bottom.
however if the rear top moints are located differently then it wont fit.
otherwise we're offering this to fit gt4 coupes and na coupes. course we will test fit to a vert if we ever get a chance to come across one in the uk and if it does fit then it'll be a bonus.

i think you mean liftback's, this site is very American where they actually have a lot of coupés compared to the UK where we have very few coupés, we mainly have liftback's but for some reason in the UK due to the shape of the car people call them coupés despite them not actually being coupés due to the number of doors

http://en.wikipedia.org/wiki/Coup%C3%A9

coupé has 2 doors (saloon/sedan style)
liftback has 3 doors (hatchback style)