ok, so this might be a tough one...., does anyone know... Options

[dans_st]

where I can find a turbo outlet flange for a garrett GT2252????

And I have searched high and low and haven't found on, and NO it is not the T25 size, I have one here and thought it was it but the one I need is just a hair smaller.

here is a link to the dimensions for turbo

That and I also need an adapter from the OEM fuel pump housings outlet, I think it is somethink like a male pipe fitting coming out of there to a -6AN male fitting, or even from the OEM fuel line in rear to go to a male -6an, so please help guys this is just about all I need to have my 6th gen running again after years...

[dans_st]

just a comparison between what I have on my GT2252 - 452187-6 which is the same on the Garrett GT2259 - 452214-3
and dimensions from a Garrett GT2554R-471171-3 which is your typical t25/t28 style.

HOPEFULLY SOMEONE CAN HELP



So my turbo is smaller than t25/28 style but still bolts to t25 manifold, also kind of odd, but it uses GT20 style oil drain fitting, So i just like most thought t25 accessories would fit and now just have these parts and they don't fit....

Also flange is my biggest problem but does anyone make a fitting to go from the OEM fuel pickup to a -6AN fitting, the thing is I have all -6AN fuel lines and cannot connect it to my pump housing

Thanks again for help guys and I just need this as I am so close to getting my celica running after being parked for 5 years this July with new paint and new rims.... SO can anyone help????