May 26, 2010 - 8:55 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I've seen some water pumps failed in a matter of 4 months ( OEM pump on a camry 2001 ) and some engine badly corroded for something as simple as topping off your coolant with the wrong stuff,.
I know a lot of you already know this, but for those who don't and a reminder for the ones who have forgotten. READ ! -------------------- ![]() |
![]() |
May 30, 2010 - 1:43 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
Best way to flush your radiator (especially for you guys with rust, and playdough, and mud; resembling substances inside of it) is to put the water hose into the top. then duct-tape the sh!t outta it and put the hose on full blast!! Make sure you open the drain port on the bottom though~
this way you'll presureize the lines and force that stuff out. Let it run till the water comming outta the bottom is clear. -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
May 30, 2010 - 5:43 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Nov 10, '09 From Louisiana Currently Offline Reputation: 5 (100%) |
Best way to flush your radiator (especially for you guys with rust, and playdough, and mud; resembling substances inside of it) is to put the water hose into the top. then duct-tape the sh!t outta it and put the hose on full blast!! Make sure you open the drain port on the bottom though~ this way you'll presureize the lines and force that stuff out. Let it run till the water comming outta the bottom is clear. Lol I do that with every car I touch. Let it rub for about 10 minutes or so like that and then just close the drain fill with coolant an let it run for a bit with the cap off to get the air bubbles out. Good as new. |
Culpable04 choosing the right coolant May 26, 2010 - 8:55 AM
Hanyo yup i am one of the few people who OCD about coola... May 27, 2010 - 4:14 AM
blu94gt QUOTE (Hanyo @ May 27, 2010 - 4:14 A... May 27, 2010 - 9:59 PM
Rook ugh. i'm having that problem right now. (mu... May 29, 2010 - 1:46 PM
Johnnyny QUOTE (Rook @ May 29, 2010 - 2:46 PM... May 29, 2010 - 2:22 PM
Rook QUOTE (Johnnyny @ May 29, 2010 - 3:2... May 30, 2010 - 12:20 AM
D-Man I choose to got the dealership and get the TOYOTA ... May 29, 2010 - 2:26 PM
HectortheRican QUOTE (D-Man @ May 29, 2010 - 2... May 29, 2010 - 4:46 PM
hurley97 QUOTE (D-Man @ May 29, 2010 - 3... May 30, 2010 - 8:06 PM
KAOS QUOTE (D-Man @ May 29, 2010 - 1... Jun 11, 2010 - 10:04 AM
Jamchell QUOTE (D-Man @ May 29, 2010 - 3... May 29, 2010 - 4:45 PM
D-Man depends on the dealership. Usually 26 dollars give... May 29, 2010 - 4:56 PM
HectortheRican QUOTE (D-Man @ May 29, 2010 - 4... May 29, 2010 - 5:55 PM
OOBE My GEN3 3S-GTE literally had inches of mud cloggin... May 30, 2010 - 5:24 AM
Hanyo QUOTE (OOBE @ May 30, 2010 - 3:24 AM... May 30, 2010 - 5:29 AM
HectortheRican QUOTE (OOBE @ May 30, 2010 - 5:24 AM... May 30, 2010 - 11:53 AM
Rook QUOTE (D-Man @ May 30, 2010 - 1... Jul 22, 2010 - 12:10 AM
malpaso I have been using the same coolant in my celi (lon... Jun 11, 2010 - 3:27 PM
krom8 You can buy a flush kit for not much money. Flushi... Jul 22, 2010 - 1:56 AM
jordisonjr Is there a how to somewhere on how to flush the wh... Jul 22, 2010 - 3:56 PM
Smaay there is only one type of coolant you are supposed... Jul 22, 2010 - 4:04 PM
krom8 Here's a pretty good general write up on how t... Jul 22, 2010 - 9:52 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 6th, 2025 - 9:03 PM |