Jun 13, 2010 - 6:04 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Sep 6, '03 From hudson ,iowa Currently Offline Reputation: 1 (100%) |
ok so i had alot of codes and cars a/f is way off and while checkign the plugs and harness to make sure the senors were getting ground and power which they are , but while the car was running i decided for some reason to unplug the center 16 pin harness , thats coolant temp, aft , air intake temp , throttle position and oxygen sensor and knock i believe , much to my surprise the car still ran , with very little to no effect , so does that narrow my problem down to the ecu as the culprit , if so i need a new jdm ecu for my 2nd gen
This post has been edited by pxcr440: Jun 30, 2010 - 1:41 PM |
![]() |
Jun 14, 2010 - 2:17 AM
|
|
|
Enthusiast ![]() Joined Feb 6, '08 From Latvia Currently Offline Reputation: 0 (0%) |
pm
-------------------- 1994 MR2 SW20, 1990 Celica ST185, both 3SGTE
turbo celica | celica club .eu | celica gt4 | imports | Toyota GT 86 | Scion FR-S | Subaru BRZ |
![]() ![]() |
| Lo-Fi Version | Time is now: November 25th, 2025 - 11:42 AM |