need help....rebuilding a 5sfe, new problem, wont start nor crank !! Options

[Malhar95]

car info:
1995 toyota celica gt convertible

okay so when i got my car, i didnt really know what all is wrong with it. When i wend to the mechanic, he said i have low compression on one of the cylinders. He suggested a new engine. THen i went to another mechanic. he took some tubes out and told me one on my valve is bent and suggested a new cylinderhead.I got it to work, and installed ebay headers and an intake. about two weeks ago, i blew my header gasket.
Now i ordered a new cylinderhead from ebay :

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWNX%3AIT

my brother now tells me to rebuild the complete engine. He says i now need the following:
Bearings
pistons
motor mounts
crankshaft
oil pump
waterpump
timing belt
gasket set
lubricants and sealants


i found a rebuild kit on ebay for 300 dollars shipped but it doesnot have the crankshaft, pumps and timing belt.

i was just wanted to know if this is all i need and/or something else. and how much would the labor be for some stuff i cannot do it myself.

please help me i would really appriciate it.

if some of u live near houston texas (tx) can you meet me and tell me all i need!

This post has been edited by Malhar95: Aug 17, 2010 - 3:35 AM

[mkernz22]

if you're looking to put a turbo on there, you also have to change the compression ratio of the engine otherwise you will blow it after a while. the more boost you add, the easier it will be to blow it. what you should do is just save up for a 3sgte and rebuild that because it comes stock with the turbo so the compression will be right for a turbo, and it has over 100 more horses than your 5s-fe. it will save you some money (in some respect) and you will have a fast car.