wheel spacers and fender rolling, installed with pics Options

[Batman722]

a few weeks ago I rolled my fenders and this is why.

I picked up some Ichiba 15mm spacers for the car and put the rears in today. Here's a couple of pics

first, removed the wheel, caliper, rotor



removed the rear bearing assembly (had to take off a couple of ebrake springs for better access)



next, I had a spare set of rear bearing assemblies and got the longer studs installed in and had them cleaned/painted
old one on the top, new on the bottom with the new longer studs



bolted on the assembly, put ebrake springs back together



caliper and rotor back on with the spacer



trimmed the mudflap



spacer and wheel



no rubbing, just better handling.
I'll do the fronts whe I put in the GT-Four brakes in a few weeks.

[terbear4god4life]

....... i wanna see the flushness






or im not satisfied.