Jun 15, 2010 - 8:33 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
▼New Questions▼
I have a CAI for my ST, I feel like it gave me a little more power over stock, but it used to hang down on the tranni, and the heat shield use to actually get a little hot, and I assume the air isn't all that cold. So I moved the piping around and got a little more to bend further. I got it almost to the driver side turn signal. With the invader kit, its a big opening under the turn, and thats right about where it rests. I dont feel much of a difference from when it was in it original place and now, although it sounds better thanks- Also My air intake sensor (temp sensor?) is wrapped like 75% in electrical tape, never noticed it before. But should I take it off? would this affect anything? ▼Cleaning Air filter question ▼ I know there are K&N cleaner kits.... but I dont think its worth the money to buy since its not really dirty. I have a pressure washer, so I was wondering can I just lightly wash it, would that get the dirt and particles out? thanks! This post has been edited by mgnt232: Jun 16, 2010 - 11:39 AM -------------------- |
![]() |
Jun 17, 2010 - 12:55 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
In the end you won't gain much power, but it makes a fun noise when I put my foot down - thats all that matters, right?
If you're going to route your intake like that make sure you go buy an AEM air bypass valve and use it to replace the coupler next to your distributor. That way if the filter gets submerged you don't suck water into the motor. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
Jun 17, 2010 - 11:27 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
Yeah im more interested in the sound, because I like it.
You dont have to be insulting either lol, saying go back to 6th grade lol, sorry i dont remember or care about middle school- And i thought about getting the bypass but, the filter was in a riskier place before I moved it, and never got "submerged". Now its in a pretty safe place guarded by the splash shields, bumper, and the all around heat shield of the filter its self. So in order to get it submerged, my whole car would have to start to be under water lol. I dont quite drive through things like that.... no mudding in the celi -------------------- |
mgnt232 Intake questions- Jun 15, 2010 - 8:33 PM
4-eyed-freek dawn dish soap and warm water will do, just hand w... Jun 15, 2010 - 10:33 PM
Hanyo QUOTE (mgnt232 @ Jun 15, 2010 - 6:33... Jun 15, 2010 - 11:31 PM
GriffGirl QUOTE (Hanyo @ Jun 15, 2010 - 9:31 P... Jun 17, 2010 - 12:14 PM
mgnt232 Bump-New Jun 16, 2010 - 12:40 PM
stephen_lee its not the length, its the number and the angle o... Jun 16, 2010 - 1:47 PM
mgnt232 Well heres a pic of what it basically is (pic with... Jun 16, 2010 - 2:52 PM
terbear4god4life looks like 3inch piping..
i don't think the... Jun 16, 2010 - 3:52 PM
mgnt232 It is 3" piping, is that too big?
There is on... Jun 16, 2010 - 4:29 PM
terbear4god4life no im using 3inch too
it don't matter..i th... Jun 16, 2010 - 5:19 PM
mgnt232 Cool, how do you keep your headers clean? or is th... Jun 16, 2010 - 8:55 PM
hatchy_gt-s The reason your rpms increased is simple science c... Jun 16, 2010 - 10:30 PM
solidxsnake QUOTE (hatchy_gt-s @ Jun 16, 2010 ... Jun 16, 2010 - 10:40 PM
hatchy_gt-s QUOTE (solidxsnake @ Jun 16, 2010 - 11... Jun 16, 2010 - 10:45 PM
azian_advanced QUOTE (stephen_lee @ Jun 16, 2010 - 1... Jun 17, 2010 - 12:58 AM
hatchy_gt-s QUOTE (azian_advanced @ Jun 17, 2010 - 1... Jun 17, 2010 - 11:58 PM
solidxsnake QUOTE (hatchy_gt-s @ Jun 18, 2010 ... Jun 25, 2010 - 10:37 AM
azian_advanced QUOTE (hatchy_gt-s @ Jun 17, 2010 ... Jun 25, 2010 - 5:19 PM
solidxsnake QUOTE (azian_advanced @ Jun 25, 2010 - 6... Jun 25, 2010 - 9:31 PM
terbear4god4life omg my heads going too f****** explode.
it don... Jun 17, 2010 - 12:44 AM
hatchy_gt-s QUOTE (terbear4god4life @ Jun 17, 2010 ... Jun 17, 2010 - 4:28 PM
95CelicaST And NEVER wash from the outside in, or you'll ... Jun 17, 2010 - 3:03 PM
terbear4god4life lol i just caught that Jun 17, 2010 - 9:05 PM
chacha good stuff...surface to volume ratios...you want m... Jun 24, 2010 - 1:39 AM
blu94gt Has anyone ever tried a cowl-induction intake? I... Jun 25, 2010 - 11:08 AM
solidxsnake QUOTE (blu94gt @ Jun 25, 2010 - 12:0... Jun 25, 2010 - 12:13 PM
blu94gt QUOTE (solidxsnake @ Jun 25, 2010 - 12... Jun 25, 2010 - 12:59 PM
mgnt232 thats pretty sweet, deff. update us with anything ... Jun 25, 2010 - 11:42 PM
SleekCelica You should put an intake right out the top of your... Jun 30, 2010 - 11:03 AM
SwissFerdi QUOTE (SleekCelica @ Jun 30, 2010 - 12... Jun 30, 2010 - 1:44 PM
solidxsnake QUOTE (SwissFerdi @ Jun 30, 2010 - 2... Jul 1, 2010 - 9:09 AM
Nartanian All this talk and arguing over equations only to a... Jun 30, 2010 - 12:01 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 15th, 2025 - 4:14 PM |