basic supply list for a paintjob, it has been requested so i will do my best Options

[b1gr3d]

body filler : evercoat lightweight filler - $18 / gal.
primer : Marhyde 2k primer and catalyst - $120 gal. primer & 1 qt of catalyst(i used 2.5 gallons)
base coat : DuPont 99k - $200 gal.
base maker : DuPont chromasystem 7160s low temp - $70 gal. i think
clear coat : Nason select 496-00 and 483-78 mid temp activator - $80 for 1 gal of clear and 1 qt activator (purchased 2.5 gals)
reducer : Finish Pro (pretty generic brand) mid temp - $20 gal i think ( i mixed with clear to help it flow out more)
prep : dupont 7160s prep sol - maybe $20 gal.

guns used : primer - old Sharpe with a 1.6 tip
base/ clear - Devilbiss millennium gti probably a 1.2 tip

sanding : paper i recommended using all 3m
36 grit for rough filler work, 80 for general filler work, 180 for primer prep on filler, 400wet for gen primer prep,
600wet for paint prep, 800wet for paint prep, 1500wet for buffing and 2000wet for buffing

misc : durablocks!!! if you have ever used them then you know why. i used them to block filler, primer and to wet sand. 1in tape, 1.5in tape, seam sealer, cold knife, long knife, 12in paper, 20in paper(i think),

buffing : makita variable speed polisher running at 1100rpm, wool pad, black "waffle" foam pad, finesse it 2 buf compound, finesse it 3 machine glaze-dark, eagle one nano wax

anything w/o a price i already had available to me. if there are any questions/ requests feel free to ask

This post has been edited by b1gr3d: Jan 22, 2010 - 11:50 AM

[KAOS]

Thats a great shopping list, however; I need to know where I can buy all those supplies.

... especially here in Canada, I have no clue where to go

[mak5603]

Thats a great shopping list, however; I need to know where I can buy all those supplies.

... especially here in Canada, I have no clue where to go

Not sure if there is Napa Autoparts in Canada, but Napa mixes paint. I used their Crossfire paint (Clear coat added) for my Hood, hood vents and spoiler, Bumper, P side Fender, F/R Splitters, and spoiler. I think they turned out pretty good.