Jun 18, 2010 - 9:01 PM
|
|
|
Enthusiast ![]() Joined Mar 3, '09 From Tampa, Florida Currently Offline Reputation: 0 (0%) |
So today I was just driving to meet my girlfriend. Everything was going good. Slowed down to take a turn at about 10 mph and all I see is my tire rolling into the SUV stopped at the light. Get out, see the huge gouge I left in the road and realize my lug nut studs got completely sheared off somehow. Worst part is that it banged up my fender pretty bad. Will maybe try to get pictures some time soon.
|
![]() |
Jun 20, 2010 - 10:02 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
a bad bearing would not snap the studs, what snaps the studs oddly are loose lug nuts. loose lug nuts allow the weight of the wheel to push perpendicular against them since the clamping force is gone, they're not made for that kind of load and they break. check the hub of your wheel, is it caked with corrosion? that can cause you to loose torque as the soft aluminum corrosion compresses after the lugs are tightened. clean the hubs of aluminum wheels when they are dirty, always. its a pain in the ass but it has to be done. apply some brake grease in a light coat to prevent them from corroding more and sticking to the brake rotor hat.
also always torque and re-check your lug nuts later if hand torquing. -------------------- |
Chhaos Tire came off my Celi.... Jun 18, 2010 - 9:01 PM
mgnt232 sounds like the lugs have been continuously over t... Jun 18, 2010 - 11:00 PM
Chhaos Yeah, I'm pretty sure I did them properly. Eve... Jun 18, 2010 - 11:55 PM
cyberblader1130 Sounds like a wheel bearing. Wheel bearings can ca... Jun 19, 2010 - 10:13 PM
Jamchell Wow, maybe you got the only made in china celica? ... Jun 20, 2010 - 6:09 AM
Chhaos QUOTE (cyberblader1130 @ Jun 19, 2010 - ... Jun 20, 2010 - 9:04 AM
Chhaos Alright, so I may just need to take care of it mor... Jun 20, 2010 - 10:24 AM
Bitter if you take the fender off the car you should be a... Jun 20, 2010 - 10:48 AM
Chhaos Will definitely try that next time I get some time... Jun 20, 2010 - 11:04 AM
cyberblader1130 How did you manage to press that wheel bearing in?... Jun 20, 2010 - 12:21 PM
Jamchell Ouch, well looking at the pic my first thought wou... Jun 20, 2010 - 12:45 PM
zfjohnson07 sometimes my front driver fender will rub on my do... Jun 20, 2010 - 1:38 PM
Mr_Tee Whats the maximum torque load for the studs and ho... Jun 23, 2010 - 11:02 AM
-Samurai- Jeez I've never seen something like this happe... Jun 27, 2010 - 12:44 AM
Hanyo but yourself a torque wrench. If i remembered core... Jun 27, 2010 - 2:32 AM
Chhaos QUOTE (Jamchell @ Jun 20, 2010 - 12... Jun 27, 2010 - 11:25 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:02 AM |