How to replace CV Axels? Options

[aspen]

My car clicks a bit when I turn, and the CV boots feel rather shot. I did some searching for the axels on Autozone and they appear to run about $80 each after I return my old ones. Anything bad about going for rebuilt ones?

I found a guide on here for replacing the left on, but I didn't bookmark it, and the search appears to be extra pokey. Even aside from that, how do you replace the axel on the drivers side?


Just to double check, clicking does equal the axels/joints right? I don't feel like tearing apart my car this weekend only to find I was incorrect.

Thanks!

[Remy]

The bearing bracket that is shown on top the one with the 4 bolt holes is similar to our Pass side axle you will need to find a shop to press it off the old axle and press it on to the new axle for you and toyota dealers won't do it for you just a FYI....you will have to find a shop or a place that rebuilts axles and ask them to do it for you I had mines done for $20.

I think thats what you were trying to say I got confused when u said u tried to bleed the axles or sumthin and then wanted to change the belt ?? lol