No A/C - button blinks Options

[speed-CCNP]

Hi all,

My A/C compressor is not staying on. I press the A/C button and I hear it click like it's engaging but it cuts on for a few seconds then the A/C button blinks.
I installed a new A/C relay, condenser, evaporator, and compressor. I took it to a shop to have it changed and its holding pressure.

I'm not sure what to try. Any thoughts by the group?

Thanks

[AMCMoe]

On the passenger side, get on the floor and look up under the dash behind the glovebox. You'll see the blower motor and some connections around it, make sure everything is connected up there. Mine was doing the same thing when I first bought the car and the AC amplifier connector was disconnected which caused the button to blink.

Hard angle to get a picture from but here's the best I could take:


This post has been edited by AMCMoe: Jun 29, 2010 - 4:07 PM

[nics]

On the passenger side, get on the floor and look up under the dash behind the glovebox. You'll see the blower motor and some connections around it, make sure everything is connected up there. Mine was doing the same thing when I first bought the car and the AC amplifier connector was disconnected which caused the button to blink.

Hard angle to get a picture from but here's the best I could take:

ok will try mine. yeah i got mine with the a/c blinking.

they say its the compressor but ill check ont his this 1st.