custom hand made front and rear lip almost done, just got the sides to complete all Options

[diegohiga]

so far is coming out perfect just have to sand it more, prime it and wait for my TRD spoiler from vincent and paint all at the same time

[Marbledpearlceli...]

Not gloating but I am ASE , ICAR , PPG certified bodyman/Painter. Not being able to take off the bumper is the least of the problems but BONDO is only suppose to be at most a 1/4 of a inch thick and not used to make parts or kits with. maybe your 1st or your 100th pot hole you will have pieces if not all of this "kit " falling off. If I were you before you waste more material I would cut it off and start over with a better material such as fiberglass or carbon fiber and do molds rather then permanently fixing it on your bumper. Im not being a ass I just no your going to regret it 3 mo from now if not sooner

[diegohiga]

Not gloating but I am ASE , ICAR , PPG certified bodyman/Painter. Not being able to take off the bumper is the least of the problems but BONDO is only suppose to be at most a 1/4 of a inch thick and not used to make parts or kits with. maybe your 1st or your 100th pot hole you will have pieces if not all of this "kit " falling off. If I were you before you waste more material I would cut it off and start over with a better material such as fiberglass or carbon fiber and do molds rather then permanently fixing it on your bumper. Im not being a ass I just no your going to regret it 3 mo from now if not sooner

yeah the bondo is only 1/4 thick... i used another marerial inside to mold it and then i add the bondo and it has a metal brackets inside to hold it good. ill see whats happens lol but at this moment i can kick it really hard and it doesnt even move a lil bit. but ill see!! if it brakes ill make one of fiber glass but i almost finish this one so i wanna finish with this