 Need help ASAP, Axle? |
 Jul 2, 2010 - 5:23 PM
|
 
|
|
Enthusiast  Joined Nov 27, '09 From Canada Currently Offline Reputation: 4 (100%)  |
My front right axle.. blew? There's all these greasy crap on my wheel and theres this continuous thudding sound when i drive. The thudding gets faster as my speed increases. Ive included pictures below. I've never done any "under-the-car" job so i'm seeking help. Is it a possible DIY for an average joe? or should i take it to a shop. And also does anyone know how much it would cost me for the parts. Part numbers would be greatly appreciated. Thanks guys.
Front left axle  Front right axle 
|
 |
Replies
|
Jul 3, 2010 - 7:38 AM
|
|
 Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
removing/installing the passenger side axle isn't very difficult and can be done with basic tools but you'll need a press to install the bearing carrier to the new axle. i have a press in my garage if you need me to do it.
This post has been edited by azian_advanced: Jul 3, 2010 - 7:38 AM -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Posts in this topic
Goonter Need help ASAP Jul 2, 2010 - 5:23 PM
95CelicaST the boot is completely trashed on the right side. ... Jul 2, 2010 - 6:31 PM Goonter Is it gonna require me playing around with the tra... Jul 2, 2010 - 6:38 PM D-Man Rebuild bearings.
http://s83.photobucket.com/albu... Jul 2, 2010 - 8:38 PM Goonter Thanks D-man. I shall send you PMs lol.. thanks al... Jul 3, 2010 - 1:17 AM njccmd2002 or pay 65 for a new spanking axle, and dont get di... Jul 3, 2010 - 3:01 AM Goonter i thought axles were 100 each? Jul 3, 2010 - 5:31 AM Goonter QUOTE (azian_advanced @ Jul 3, 2010 - 7... Jul 3, 2010 - 10:31 AM Goonter Ok so i took the rotor and caliper off. Started ra... Jul 3, 2010 - 7:36 PM D-Man Becareful on the "behind" rod not to twi... Jul 3, 2010 - 8:21 PM Goonter QUOTE (D-Man @ Jul 3, 2010 - 8... Jul 3, 2010 - 8:37 PM
Jamchell QUOTE (Goonter @ Jul 3, 2010 - 8:37 ... Jul 5, 2010 - 7:11 PM Goonter update. NVM scratch the last post.. got all the bo... Jul 3, 2010 - 9:33 PM garin look in the general discussion. there is a sticky ... Jul 3, 2010 - 11:08 PM njccmd2002 it breaks my heart to know you did not find my use... Jul 5, 2010 - 2:03 AM GriffGirl QUOTE Be careful on the "behind" rod not... Jul 6, 2010 - 11:37 AM Goonter QUOTE (njccmd2002 @ Jul 5, 2010 - 3... Jul 6, 2010 - 11:13 PM krom8 If you rebuilt the axle you might want to make sur... Jul 7, 2010 - 1:57 AM Goonter QUOTE (krom8 @ Jul 7, 2010 - 1:57 AM... Jul 7, 2010 - 2:29 AM krom8 Ouch, that's just bad luck right there. Is the... Jul 7, 2010 - 4:07 AM Goonter QUOTE (krom8 @ Jul 7, 2010 - 5:07 AM... Jul 7, 2010 - 3:21 PM 95CelicaST Jack that side into the air and grab the wheel and... Jul 7, 2010 - 5:08 PM Jamchell If your axle is binding then it can knock/thud whi... Jul 7, 2010 - 5:43 PM Goonter Ill jack it up tomorrow and see if the wheel has p... Jul 7, 2010 - 11:02 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 4th, 2025 - 11:09 PM |