Differences between EURO and JDM doors?, Going to convert to electric windows etc.. Options

[AnaXyd]

Hello!

I am going to buy some complete JDM doors(from a st202 SS-II) to my AT200. Because I am really tired of manual windows, and I got some rust on the bottom of the doors. These doors are complete with inner covers and switches and harness.

Will this be a completely bolt on swap? Or do I need to extend the harness (since its JDM) or something? Or is the doors in JDM different from mine?


I will appreciate any help here!

[GriffGirl]

The power windows and locks will not swap over, because you don't have the connectors for them in your stock dash harness. You might consider getting a dash harness from an ST with power windows, and swapping that over, too. Then it will be plug and play.

I can sort of guide you on how to connect your door harnesses so that your power windows work, but since you've got JDM door harnesses, the color of the wiring is probably different so I won't entirely be able to help you I don't think.

Oh and yeah, I did finish the power window conversion, and it works great! I haven't finished the locks though; the actuators are installed and plugged in, but currently I don't have power going to them. (I just haven't sat down to do it is all)

I also haven't swapped the power over to the power mirror controls from the stock center console location to the driver's side master switch location. Just another thing I haven't sat down to do, although I don't anticipate it being difficult at all.