Jul 10, 2010 - 2:07 PM
|
|
|
Enthusiast ![]() Joined Jun 23, '10 From Pawtucket, RI Currently Offline Reputation: 2 (100%) |
does any1 have a write up on how to install a indash dvd into a 6gc
-------------------- I only want to be faster than the guy next to me.
|
![]() |
Jul 11, 2010 - 12:18 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
It's really simple:
-twist off shift nob -carefully pull of the trim surrounding the shifter - pull off the trim around the radio. Its a little tricky but don't be scared to give it a good pull. next just remove the screws holding in stock radio. It should be two units, I believe its a cd player and then the radio. The two are held together by a a bracket. So unbolt the bracket and then you have to put the bracket on to your new screen (assuming its a double din screen not a flip.) Wire in the harness and your basically set to go. You can bolt the brackets into the car and then put all the trim pieces back in. I hope that makes at least a little bit of sense, If you need a hand let me know, I've had mine in and out numerous times. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
99celiGT Indash dvd player Jul 10, 2010 - 2:07 PM
Smiley if its a 7 inch dvd one like mine you may need to ... Jul 11, 2010 - 6:36 AM![]() ![]() |
| Lo-Fi Version | Time is now: February 28th, 2026 - 8:04 AM |