 Loose Rubbers |
 Jul 18, 2010 - 7:17 PM
|
 
|
 Enthusiast  Joined Feb 23, '10 From Niagara, ON Canada Currently Offline Reputation: 0 (0%)  |
As with all 6GC's my headlight rubber on my right side low beam lens has begun to fall out. I have tried to spread a bit of silicone on it and slip it back over the light, but that didn't hold. I want to pull the whole lens out but I'm not quite sure how they are supposed to come out. I've got the bolt from behind the turn signal, and whatever I can find up top, and it feels loose, but it doesn't come out. Do I have to move the fender or bumper? Does it just slide out? What am I missing?
Thanks it advanced! |
 |
Replies
|
Jul 18, 2010 - 10:12 PM
|
|
|
Enthusiast Joined Aug 11, '09 From Buffalo, NY Currently Offline Reputation: 15 (100%) |
The headlights on our cars are tricky. You have to take off the front bumper, after you've done that, there are two bolts underneath the headlight attached to the headlight bracket that you have to take off and the low beams have a pin that's been stuck into a hole in the fender - so you have to pull it towards the high beam, softly but firmly till it pulls out of the hole in the fender, then remove it from behind the crash bar. You'll see what I mean after you take the bumper off.
--------------------  |
Posts in this topic
OnAllFours Loose Rubbers Jul 18, 2010 - 7:17 PM
mgnt232 I could be wrong but the only way i could get my h... Jul 18, 2010 - 7:46 PM HectortheRican I'd love to just gorilla glue mine on and get ... Jul 19, 2010 - 9:16 AM azian_advanced as long as you have one clip at the top of each he... Jul 19, 2010 - 7:34 PM
OnAllFours Well, I stayed late after work tonight and pulled ... Jul 19, 2010 - 8:14 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 16th, 2025 - 12:44 PM |